diff --git a/023.slideshow/Makefile b/023.slideshow/Makefile
index ca52327..8d78c75 100644
--- a/023.slideshow/Makefile
+++ b/023.slideshow/Makefile
@@ -5,16 +5,16 @@ INTERLACE=1
 HAM_MODE=1
 
 USERSTACK_ADDRESS=7fffc # userstack used by bootblock
-BASE_ADDRESS=10000	# if you change this you must also change link.script
+BASE_ADDRESS=800	# if you change this you must also change link.script.x
 
 BOOTBLOCK_ASM=alpine_bootblock.s
-OBJS=out/init.o out/utils.o out/trackloader.o out/image.o out/blitter.o
+OBJS=out/init.o out/utils.o out/trackloader.o out/image.o out/blitter.o out/module.o out/disk.o out/data.o
 
 ifeq ($(INTERLACE),0)
-NOINTERLACE_EXTRA=mr8.png
+NOINTERLACE_EXTRA=image8.png
 endif
 
-IMAGES=mr.png mr2.png mr3.png mr4.png  mr6.png mr9.png mr10.png $(NOINTERLACE_EXTRA)
+IMAGES=image1.png image2.png image3.png image4.png image5.png image6.png image7.png $(NOINTERLACE_EXTRA)
 
 P61MODULE=out/P61.breath_of_life.lz
 
@@ -30,6 +30,8 @@ IMAGECON_ARGS=--colors 32 --quantize
 IMAGEDATA=$(addprefix out/, $(IMAGES:.png=.bin))
 endif
 
+
+
 SHRUNKDATA=$(IMAGEDATA:.bin=.lz)
 SIZEDIMAGEDATA=$(addprefix out/, $(IMAGES:.png=.sized.png))
 
@@ -40,11 +42,12 @@ FLAGS=--height=256
 endif
 
 #SYMBOL_INFO=-M
-LINK_COMMANDLINE=vlink -T link.script -brawbin1 $< $(OBJS) $(SYMBOL_INFO) -o $@
+#LINK_COMMANDLINE=vlink -T link.script.x -brawbin1 $< $(OBJS) $(SYMBOL_INFO) -osec=out/main && cat out/main.load out/main.photo > out/main.bin
+LINK_COMMANDLINE=vlink -T link.script.x -brawbin1 $< $(OBJS) $(SYMBOL_INFO) -o out/main.bin
+
 include ../shared/base.mk
 
-
-out/%.sized.png: ../assets/%.png
+out/%.sized.png: assets/%.png
 	$(RESIZE) --width=320  $(FLAGS) --blur=0.75 --input=$< --output=$@
 
 out/%.bin: out/%.sized.png
@@ -59,5 +62,5 @@ out/%.lz: ../assets/%.mod
 out/%-ham.bin: out/%.sized.png
 	$(IMAGECON) --input $< $(IMAGECON_ARGS) --output-bitplanes  --output-palette-asm --output-palette $(DITHER) --output out/$* 
 
-out/main.o: $(P61MODULE) $(SIZEDIMAGEDATA) $(IMAGEDATA) $(SHRUNKDATA) constants.i Makefile link.script
+out/main.o: $(P61MODULE) $(SIZEDIMAGEDATA) $(IMAGEDATA) $(SHRUNKDATA) constants.i Makefile link.script.x
 out/init.o: constants.i Makefile
\ No newline at end of file
diff --git a/023.slideshow/alpine_bootblock.s b/023.slideshow/alpine_bootblock.s
index f2da85f..21802c3 100644
--- a/023.slideshow/alpine_bootblock.s
+++ b/023.slideshow/alpine_bootblock.s
@@ -240,7 +240,8 @@ MotorOff:
 LoadTrak:		;loadtrack+decode.a0=dst,d0=secoffs,d1=secsleft
 	MOVE.W	D0,-(SP)
 	MOVE.W	D1,-(SP)
-	lea	(MFMbuf).w,a1
+	;; 	lea	(MFMbuf).w,a1
+	lea	(MFMbuf),a1
 	move.w	#2,$9c-2(a6)		;Clr Req
 	move.l	a1,$20-2(a6)
 	move.w	#$8210,$96-2(a6)	;DskEna
@@ -335,7 +336,8 @@ BootE:
 	cnop	0,1024
 
 ;MFMbuf is placed here after bootblock end, $3c0.w or so when copied.
-MFMbuf	equ	LoaderVars+(BootE-CopyStart)
+MFMbuf	equ	$E0000
+;; MFMbuf	equ	LoaderVars+(BootE-CopyStart)
 MFMbufE	equ 	MFMbuf+MFMlen	;lowest free address. $372e for a full bootblock.
 	
 mainStart:
diff --git a/023.slideshow/assets/image1.png b/023.slideshow/assets/image1.png
new file mode 100644
index 0000000..9b04e9d
Binary files /dev/null and b/023.slideshow/assets/image1.png differ
diff --git a/023.slideshow/assets/image2.png b/023.slideshow/assets/image2.png
new file mode 100644
index 0000000..f690013
Binary files /dev/null and b/023.slideshow/assets/image2.png differ
diff --git a/023.slideshow/assets/image3.png b/023.slideshow/assets/image3.png
new file mode 100644
index 0000000..5da796b
Binary files /dev/null and b/023.slideshow/assets/image3.png differ
diff --git a/023.slideshow/assets/image4.png b/023.slideshow/assets/image4.png
new file mode 100644
index 0000000..4a7135d
Binary files /dev/null and b/023.slideshow/assets/image4.png differ
diff --git a/023.slideshow/assets/image5.png b/023.slideshow/assets/image5.png
new file mode 100644
index 0000000..8d90ecf
Binary files /dev/null and b/023.slideshow/assets/image5.png differ
diff --git a/023.slideshow/assets/image6.png b/023.slideshow/assets/image6.png
new file mode 100644
index 0000000..2254db9
Binary files /dev/null and b/023.slideshow/assets/image6.png differ
diff --git a/023.slideshow/assets/image7.png b/023.slideshow/assets/image7.png
new file mode 100644
index 0000000..2d5e7c2
Binary files /dev/null and b/023.slideshow/assets/image7.png differ
diff --git a/assets/mr.png b/023.slideshow/assets/image8.png
similarity index 100%
rename from assets/mr.png
rename to 023.slideshow/assets/image8.png
diff --git a/023.slideshow/data.s b/023.slideshow/data.s
new file mode 100644
index 0000000..cf33f53
--- /dev/null
+++ b/023.slideshow/data.s
@@ -0,0 +1,152 @@
+	include "includes.i"
+
+	xdef	imageLookupTable
+	xdef 	compressedModule
+	xdef 	endCompressedModule
+
+InstallColorPalette:
+	include "out/image1-palette.s"
+	rts	
+InstallColorPalette2:
+	include "out/image2-palette.s"
+	rts
+InstallColorPalette3:
+	include "out/image3-palette.s"
+	rts
+InstallColorPalette4:
+	include "out/image4-palette.s"
+	rts
+InstallColorPalette5:
+	include "out/image5-palette.s"
+	rts
+InstallColorPalette6:
+	include "out/image6-palette.s"
+	rts
+InstallColorPalette7:
+	include "out/image7-palette.s"
+	rts
+	if INTERLACE==0
+InstallColorPalette8:
+	include "out/image8-palette.s"
+	rts
+	endif; INTERLACE==0
+	
+	
+	
+imageLookupTable:				; configure slideshow here
+	dc.l	InstallColorPalette 		; palette installation routine
+	dc.l	imageData1			; compressed image data
+	dc.l	endImageData1-imageData1	; compressed image data size
+	
+	dc.l	InstallColorPalette2
+	dc.l	imageData2
+	dc.l	endImageData2-imageData2
+
+	dc.l	InstallColorPalette3
+	dc.l	imageData3
+	dc.l	endImageData3-imageData3	
+
+	dc.l	InstallColorPalette4
+	dc.l	imageData4
+	dc.l	endImageData4-imageData4		
+
+	dc.l	InstallColorPalette5
+	dc.l	imageData5
+	dc.l	endImageData5-imageData5			
+
+	dc.l	InstallColorPalette6
+	dc.l	imageData6
+	dc.l	endImageData6-imageData6				
+
+
+	dc.l	InstallColorPalette7
+	dc.l	imageData7
+	dc.l	endImageData7-imageData7
+
+	if	INTERLACE==0
+	dc.l	InstallColorPalette8
+	dc.l	imageData8
+	dc.l	endImageData8-imageData8
+	endif; INTERLACE==0
+	dc.l	0		; terminate list
+	
+	
+	section .noload		; data in this section will not be loaded by the bootloader
+	cnop	0,512		; each image must be aligned to a sector boundary
+imageData1:			; because I am too lazy to read non aligned data
+	if HAM_MODE==1
+	incbin	"out/image1-ham.lz"
+	else
+	incbin	"out/image1.lz"
+	endif
+endImageData1:	
+	
+	cnop	0,512		; each image must be aligned to a sector boundary
+imageData2:			; because I am too lazy to read non aligned data
+	if HAM_MODE==1
+	incbin	"out/image2-ham.lz"
+	else
+	incbin	"out/image2.lz"
+	endif
+endImageData2:		
+
+	cnop	0,512		; each image must be aligned to a sector boundary
+imageData3:
+	if HAM_MODE==1
+	incbin	"out/image3-ham.lz"
+	else
+	incbin	"out/image3.lz"
+	endif
+endImageData3:
+	
+	cnop	0,512		; each image must be aligned to a sector boundary
+imageData4:	
+	if HAM_MODE==1
+	incbin	"out/image4-ham.lz"
+	else
+	incbin	"out/image4.lz"
+	endif
+endImageData4:	
+	
+	cnop	0,512		; each image must be aligned to a sector boundary
+imageData5:
+	if HAM_MODE==1
+	incbin	"out/image5-ham.lz"
+	else
+	incbin	"out/image5.lz"
+	endif
+endImageData5:	
+	
+	cnop	0,512		; each image must be aligned to a sector boundary
+imageData6:	
+	if HAM_MODE==1
+	incbin	"out/image6-ham.lz"
+	else
+	incbin	"out/image6.lz"
+	endif
+endImageData6:
+
+	cnop	0,512		; each image must be aligned to a sector boundary
+imageData7:	
+	if HAM_MODE==1
+	incbin	"out/image7-ham.lz"
+	else
+	incbin	"out/image7.lz"
+	endif
+endImageData7:
+
+	if INTERLACE==0
+	cnop	0,512		; each image must be aligned to a sector boundary
+imageData8:	
+	if HAM_MODE==1
+	incbin	"out/image8-ham.lz"
+	else
+	incbin	"out/image8.lz"
+	endif
+endImageData8:
+	endif; INTERLACE==0
+
+	cnop	0,512
+compressedModule:
+	incbin "out/P61.breath_of_life.lz"
+endCompressedModule:
diff --git a/023.slideshow/disk.s b/023.slideshow/disk.s
new file mode 100644
index 0000000..b763365
--- /dev/null
+++ b/023.slideshow/disk.s
@@ -0,0 +1,27 @@
+	xdef	LoadDiskData
+	
+LoadDiskData:
+	;; a0 - destination address
+	;; a1 - start address
+	;; d0 - size
+	movem.l	d0-a6,-(sp)
+	lea 	$dff002,a6	; LoadMFMB uses this custom base addr
+
+	move.l	d0,d1
+	
+	move.l	a1,d0
+	move.l	#startCode,d2
+	sub.l	d2,d0		; offset from start of this module
+	lsr.l	#6,d0		; bytes -> sectors
+	lsr.l	#3,d0		
+	add.l	#2,d0		; offset for bootblock
+
+	
+	add.l	#512,d1
+	lsr.l	#6,d1		; bytes -> sectors
+	lsr.l	#3,d1
+	neg.w	d1
+	jsr 	LoadMFMB	; load the data!
+	
+	movem.l (sp)+,d0-a6
+	rts
diff --git a/023.slideshow/image.s b/023.slideshow/image.s
index 23c4738..51820ec 100644
--- a/023.slideshow/image.s
+++ b/023.slideshow/image.s
@@ -1,7 +1,6 @@
 	include "includes.i"
 
 	xdef 	LoadNextImage	
-	xdef	LoadModule
 	xdef 	SetupImage
 	
 LoadNextImage:
@@ -26,29 +25,28 @@ LoadImage:
 	;; d0 - size
 	;; a1 - start address
 	;; a2 - InstallColorPalette(X) address
-	
-	move.l	bitplanesp3,a0		; load compressed data into bitplanes3
-	bsr	DoLoadImage		; load data from disk
+
+	lea	bitplanes3,a0
+	bsr	LoadDiskData		; load data from disk
 
 	move.l	nextbitplane,a1		; decompress into offscreen bitplanesp(1/2)
-	move.l	(a1),a1		
-	;a0 = Input buffer to be decompressed. Must be 16-bit aligned!
-	;a1 = Output buffer. Points to the end of the data at exit
+	
+	;; a0 = Input buffer to be decompressed. Must be 16-bit aligned!
+	;; a1 = Output buffer. Points to the end of the data at exit
 	jsr	Depack
 
 	jsr 	WaitVerticalBlank	; avoid tearing when we show the new image
 	jsr	(a2)			; install new color palette
 	bsr	SetupImage		; display new image
 
-
 	;; toggle offscreen bitplane
-	cmp.l	#bitplanesp1,nextbitplane
-	beq	.setbitplanesp2
-.setbitplanesp1:
-	move.l	#bitplanesp1,nextbitplane
+	cmp.l	#bitplanes1,nextbitplane
+	beq	.setbitplanes2
+.setbitplanes1:
+	move.l	#bitplanes1,nextbitplane
 	bra	.done
-.setbitplanesp2:
-	move.l	#bitplanesp2,nextbitplane	
+.setbitplanes2:
+	move.l	#bitplanes2,nextbitplane	
 .done:
 	rts
 	
@@ -69,199 +67,9 @@ SetupImage:
 	movem.l (sp)+,d0-a6
 	rts
 
-DoLoadImage:
-	;; a0 - destination address
-	;; a1 - start address
-	;; d0 - size
-	movem.l	d0-a6,-(sp)
-	lea 	$dff002,a6	; LoadMFMB uses this custom base addr
-
-	move.l	d0,d1
-	
-	move.l	a1,d0
-	move.l	#startCode,d2
-	sub.l	d2,d0		; offset from start of this module
-	lsr.l	#6,d0		; bytes -> sectors
-	lsr.l	#3,d0		
-	add.l	#2,d0		; offset for bootblock
-
-	
-	add.l	#512,d1
-	lsr.l	#6,d1		; bytes -> sectors
-	lsr.l	#3,d1
-	neg.w	d1
-	jsr 	LoadMFMB	; load the data!
-	
-	movem.l (sp)+,d0-a6
-	rts
-
-imageLookupTable:				; configure slideshow here
-	dc.l	InstallColorPalette 		; palette installation routine
-	dc.l	imageData1			; compressed image data
-	dc.l	endImageData1-imageData1	; compressed image data size
-	
-	dc.l	InstallColorPalette2
-	dc.l	imageData2
-	dc.l	endImageData2-imageData2
-
-	dc.l	InstallColorPalette3
-	dc.l	imageData3
-	dc.l	endImageData3-imageData3	
-
-	dc.l	InstallColorPalette4
-	dc.l	imageData4
-	dc.l	endImageData4-imageData4		
-
-	dc.l	InstallColorPalette5
-	dc.l	imageData5
-	dc.l	endImageData5-imageData5			
-
-	dc.l	InstallColorPalette6
-	dc.l	imageData6
-	dc.l	endImageData6-imageData6				
-
-
-	dc.l	InstallColorPalette7
-	dc.l	imageData7
-	dc.l	endImageData7-imageData7
-
-	if	INTERLACE==0		
-	dc.l	InstallColorPalette8
-	dc.l	imageData8
-	dc.l	endImageData8-imageData8
-	endif; INTERLACE==0
-	dc.l	0		; terminate list
 
 imageIndex:
 	dc.l	0
 nextbitplane:
-	dc.l	bitplanesp1
-
-LoadModule:
-	;; a0 - destination address
-	;; a1 - start address
-	;; d0 - size
-	movem.l	d0-a6,-(sp)
-	lea	endCode,a0
-	lea	compressedModule,a1
-	move.l	#endCompressedModule,d0
-	sub.l	#compressedModule,d0
-	jsr	DoLoadImage
-
-	;a0 = input buffer to be decompressed. Must be 16-bit aligned!
-	;a1 = output buffer. Points to the end of the data at exit
-	lea	endCode,a0
-	lea	Module1,a1
-	move.l	(a1),a1
-	jsr	Depack
+	dc.l	bitplanes1	
 	
-	movem.l (sp)+,d0-a6
-	rts
-	
-InstallColorPalette:
-	include "out/mr-palette.s"
-	rts	
-InstallColorPalette2:
-	include "out/mr2-palette.s"
-	rts
-InstallColorPalette3:
-	include "out/mr3-palette.s"
-	rts
-InstallColorPalette4:
-	include "out/mr4-palette.s"
-	rts
-InstallColorPalette5:
-	include "out/mr9-palette.s"
-	rts
-InstallColorPalette6:
-	include "out/mr6-palette.s"
-	rts
-InstallColorPalette7:
-	include "out/mr10-palette.s"
-	rts
-	if INTERLACE==0
-InstallColorPalette8:
-	include "out/mr8-palette.s"
-	rts
-	endif; INTERLACE==0
-	
-	section .photo		; data in this section will not be loaded by the bootloader
-	cnop	0,512		; each image must be aligned to a sector boundary
-imageData1:			; because I am too lazy to read non aligned data
-	if HAM_MODE==1
-	incbin	"out/mr-ham.lz"
-	else
-	incbin	"out/mr.lz"
-	endif
-endImageData1:	
-	
-	cnop	0,512		; each image must be aligned to a sector boundary
-imageData2:			; because I am too lazy to read non aligned data
-	if HAM_MODE==1
-	incbin	"out/mr2-ham.lz"
-	else
-	incbin	"out/mr2.lz"
-	endif
-endImageData2:		
-
-	cnop	0,512		; each image must be aligned to a sector boundary
-imageData3:
-	if HAM_MODE==1
-	incbin	"out/mr3-ham.lz"
-	else
-	incbin	"out/mr3.lz"
-	endif
-endImageData3:
-	
-	cnop	0,512		; each image must be aligned to a sector boundary
-imageData4:	
-	if HAM_MODE==1
-	incbin	"out/mr4-ham.lz"
-	else
-	incbin	"out/mr4.lz"
-	endif
-endImageData4:	
-	
-	cnop	0,512		; each image must be aligned to a sector boundary
-imageData5:
-	if HAM_MODE==1
-	incbin	"out/mr9-ham.lz"
-	else
-	incbin	"out/mr9.lz"
-	endif
-endImageData5:	
-	
-	cnop	0,512		; each image must be aligned to a sector boundary
-imageData6:	
-	if HAM_MODE==1
-	incbin	"out/mr6-ham.lz"
-	else
-	incbin	"out/mr6.lz"
-	endif
-endImageData6:
-
-	cnop	0,512		; each image must be aligned to a sector boundary
-imageData7:	
-	if HAM_MODE==1
-	incbin	"out/mr10-ham.lz"
-	else
-	incbin	"out/mr10.lz"
-	endif
-endImageData7:
-
-	if INTERLACE==0		
-	cnop	0,512		; each image must be aligned to a sector boundary
-imageData8:	
-	if HAM_MODE==1
-	incbin	"out/mr8-ham.lz"
-	else
-	incbin	"out/mr8.lz"
-	endif
-endImageData8:
-	endif; INTERLACE==0
-
-	cnop	0,512
-compressedModule:
-	incbin "out/P61.breath_of_life.lz"
-endCompressedModule:
-
diff --git a/023.slideshow/init.s b/023.slideshow/init.s
index b94efca..4c7ae64 100644
--- a/023.slideshow/init.s
+++ b/023.slideshow/init.s
@@ -40,7 +40,7 @@ HAMBIT	equ 0
 	lea	copperList,a0
 	move.l	a0,COP1LC(a6)
  	move.w  COPJMP1(a6),d0
-	move.w	#(DMAF_BLITTER|DMAF_SETCLR!DMAF_COPPER!DMAF_RASTER!DMAF_MASTER),DMACON(a6)
+ 	move.w	#(DMAF_BLITTER|DMAF_SETCLR!DMAF_COPPER!DMAF_RASTER!DMAF_MASTER),DMACON(a6) 
 	;; 	move.w	#(INTF_SETCLR|INTF_VERTB|INTF_INTEN),INTENA(a6)
 	movem.l (sp)+,d0-a6
 	rts
\ No newline at end of file
diff --git a/023.slideshow/link.script b/023.slideshow/link.script
deleted file mode 100644
index 565e7e7..0000000
--- a/023.slideshow/link.script
+++ /dev/null
@@ -1,24 +0,0 @@
-MEMORY
-{
-ram: org = 0x10000, len = 0x100000
-}
-
-SECTIONS
-{
-load : { 
-      startCode = .;
-      *(.text) 
-      *(.bss)
-      *(.data)
-      *(CODE)
-      *(DATA)
-      endCode = .;
-      } > ram
-
-photo ALIGN(512) : {
-      startData = .;
-      *(.photo)
-      endData = .;
-      } > ram
-}
-
diff --git a/023.slideshow/link.script.x b/023.slideshow/link.script.x
new file mode 100644
index 0000000..f01860d
--- /dev/null
+++ b/023.slideshow/link.script.x
@@ -0,0 +1,28 @@
+MEMORY 
+{
+    disk: org = 0x800, len = 0xDB800
+    ram: org = 0x00000, len = 0x80000
+}
+
+SECTIONS
+{
+    load : { 
+        startCode = .;
+        *(.text) 
+        *(.data)
+        *(CODE)
+        *(DATA)
+        endCode = .;
+    } > disk
+
+    noload ALIGN(512) : {
+        startData = .;
+        *(.noload)
+        endData = .;
+    } > disk
+
+    bss (NOLOAD) : {
+        . = endCode;
+        *(.bss)
+    } > ram;
+}
\ No newline at end of file
diff --git a/023.slideshow/module.s b/023.slideshow/module.s
new file mode 100644
index 0000000..fd10212
--- /dev/null
+++ b/023.slideshow/module.s
@@ -0,0 +1,21 @@
+	xdef	LoadModule
+
+LoadModule:
+	movem.l	d0-a6,-(sp)
+	lea	bitplanes1,a0
+	lea	compressedModule,a1
+	move.l	#endCompressedModule,d0
+	sub.l	#compressedModule,d0
+	;; a0 - destination address
+	;; a1 - start address
+	;; d0 - size
+	jsr	LoadDiskData
+
+	;; a0 - input buffer to be decompressed. Must be 16-bit aligned!
+	;; a1 - output buffer. Points to the end of the data at exit
+	lea	bitplanes1,a0
+	lea	Module,a1
+	jsr	Depack
+	
+	movem.l (sp)+,d0-a6
+	rts
\ No newline at end of file
diff --git a/023.slideshow/palettes/image1.pal b/023.slideshow/palettes/image1.pal
new file mode 100644
index 0000000..b180d20
--- /dev/null
+++ b/023.slideshow/palettes/image1.pal
@@ -0,0 +1,16 @@
+210
+fed
+b76
+fff
+ecb
+321
+744
+c98
+fdc
+c53
+dba
+965
+b87
+ffe
+533
+da9
diff --git a/023.slideshow/palettes/image2.pal b/023.slideshow/palettes/image2.pal
new file mode 100644
index 0000000..b180d20
--- /dev/null
+++ b/023.slideshow/palettes/image2.pal
@@ -0,0 +1,16 @@
+210
+fed
+b76
+fff
+ecb
+321
+744
+c98
+fdc
+c53
+dba
+965
+b87
+ffe
+533
+da9
diff --git a/023.slideshow/palettes/image3.pal b/023.slideshow/palettes/image3.pal
new file mode 100644
index 0000000..b180d20
--- /dev/null
+++ b/023.slideshow/palettes/image3.pal
@@ -0,0 +1,16 @@
+210
+fed
+b76
+fff
+ecb
+321
+744
+c98
+fdc
+c53
+dba
+965
+b87
+ffe
+533
+da9
diff --git a/023.slideshow/palettes/image4.pal b/023.slideshow/palettes/image4.pal
new file mode 100644
index 0000000..b180d20
--- /dev/null
+++ b/023.slideshow/palettes/image4.pal
@@ -0,0 +1,16 @@
+210
+fed
+b76
+fff
+ecb
+321
+744
+c98
+fdc
+c53
+dba
+965
+b87
+ffe
+533
+da9
diff --git a/023.slideshow/palettes/image5.pal b/023.slideshow/palettes/image5.pal
new file mode 100644
index 0000000..b180d20
--- /dev/null
+++ b/023.slideshow/palettes/image5.pal
@@ -0,0 +1,16 @@
+210
+fed
+b76
+fff
+ecb
+321
+744
+c98
+fdc
+c53
+dba
+965
+b87
+ffe
+533
+da9
diff --git a/023.slideshow/palettes/image6.pal b/023.slideshow/palettes/image6.pal
new file mode 100644
index 0000000..b180d20
--- /dev/null
+++ b/023.slideshow/palettes/image6.pal
@@ -0,0 +1,16 @@
+210
+fed
+b76
+fff
+ecb
+321
+744
+c98
+fdc
+c53
+dba
+965
+b87
+ffe
+533
+da9
diff --git a/023.slideshow/palettes/image7.pal b/023.slideshow/palettes/image7.pal
new file mode 100644
index 0000000..b180d20
--- /dev/null
+++ b/023.slideshow/palettes/image7.pal
@@ -0,0 +1,16 @@
+210
+fed
+b76
+fff
+ecb
+321
+744
+c98
+fdc
+c53
+dba
+965
+b87
+ffe
+533
+da9
diff --git a/023.slideshow/palettes/image8.pal b/023.slideshow/palettes/image8.pal
new file mode 100644
index 0000000..b180d20
--- /dev/null
+++ b/023.slideshow/palettes/image8.pal
@@ -0,0 +1,16 @@
+210
+fed
+b76
+fff
+ecb
+321
+744
+c98
+fdc
+c53
+dba
+965
+b87
+ffe
+533
+da9
diff --git a/023.slideshow/palettes/mr.pal b/023.slideshow/palettes/mr.pal
deleted file mode 100644
index 9a3f8db..0000000
--- a/023.slideshow/palettes/mr.pal
+++ /dev/null
@@ -1,17 +0,0 @@
-111
-9ac
-244
-cef
-28a
-744
-122
-3ce
-267
-cbd
-978
-422
-b8c
-def
-133
-19c
-
diff --git a/023.slideshow/palettes/mr10.pal b/023.slideshow/palettes/mr10.pal
deleted file mode 100644
index ebd0df8..0000000
--- a/023.slideshow/palettes/mr10.pal
+++ /dev/null
@@ -1,17 +0,0 @@
-000
-fff
-757
-a23
-99a
-355
-ccc
-788
-258
-222
-eee
-666
-abb
-444
-555
-777
-
diff --git a/023.slideshow/palettes/mr2.pal b/023.slideshow/palettes/mr2.pal
deleted file mode 100644
index 16c1ea0..0000000
--- a/023.slideshow/palettes/mr2.pal
+++ /dev/null
@@ -1,16 +0,0 @@
-011
-865
-222
-c97
-543
-ecb
-b75
-344
-689
-432
-754
-111
-233
-da8
-fed
-455
diff --git a/023.slideshow/palettes/mr3.pal b/023.slideshow/palettes/mr3.pal
deleted file mode 100644
index 9a3f8db..0000000
--- a/023.slideshow/palettes/mr3.pal
+++ /dev/null
@@ -1,17 +0,0 @@
-111
-9ac
-244
-cef
-28a
-744
-122
-3ce
-267
-cbd
-978
-422
-b8c
-def
-133
-19c
-
diff --git a/023.slideshow/palettes/mr4.pal b/023.slideshow/palettes/mr4.pal
deleted file mode 100644
index 24ccc55..0000000
--- a/023.slideshow/palettes/mr4.pal
+++ /dev/null
@@ -1,17 +0,0 @@
-000
-da8
-532
-ffe
-211
-865
-922
-dcb
-e63
-544
-322
-988
-fd5
-511
-111
-edd
-
diff --git a/023.slideshow/palettes/mr6.pal b/023.slideshow/palettes/mr6.pal
deleted file mode 100644
index 20a5115..0000000
--- a/023.slideshow/palettes/mr6.pal
+++ /dev/null
@@ -1,17 +0,0 @@
-000
-dcd
-833
-fff
-a02
-877
-134
-ba9
-555
-701
-112
-d02
-def
-058
-ec9
-333
-
diff --git a/023.slideshow/palettes/mr8.pal b/023.slideshow/palettes/mr8.pal
deleted file mode 100644
index 4859933..0000000
--- a/023.slideshow/palettes/mr8.pal
+++ /dev/null
@@ -1,17 +0,0 @@
-000
-aad
-734
-cef
-67a
-d58
-211
-722
-346
-ace
-fef
-933
-e8b
-79c
-d27
-568
-
diff --git a/023.slideshow/palettes/mr9.pal b/023.slideshow/palettes/mr9.pal
deleted file mode 100644
index 63acbb4..0000000
--- a/023.slideshow/palettes/mr9.pal
+++ /dev/null
@@ -1,16 +0,0 @@
-100
-a86
-522
-dc9
-744
-311
-eeb
-cb8
-965
-633
-b97
-200
-854
-411
-eda
-422
diff --git a/023.slideshow/slideshow.s b/023.slideshow/slideshow.s
index bd09912..4c98c37 100644
--- a/023.slideshow/slideshow.s
+++ b/023.slideshow/slideshow.s
@@ -2,23 +2,22 @@
 	include "P6112-Options.i"
 	
 	xdef 	PokeBitplanePointers
-	xdef	Level3InterruptHandler
 	xdef	copperList
 	xdef 	copperListAlternate
-	xdef 	bitplanesp1
-	xdef 	bitplanesp2
-	xdef 	bitplanesp3
-	xdef	Module1
+	xdef 	bitplanes1
+	xdef 	bitplanes2
+	xdef 	bitplanes3
+	xdef	Module
 	
 byteMap:
 	dc.l	Entry
 	dc.l	endCode-byteMap
 
 Entry:
-	move.l	userstack,a7
+	lea	userstack,a7
 	lea 	CUSTOM,a6
 
-	move	#$7ff,DMACON(a6)	; disable all dma
+	;; move	#$7ff,DMACON(a6)	; disable all dma
 	move	#$7fff,INTENA(a6) 	; disable all interrupts		
 	
 	move.w  d0,COLOR00(a6)		; black screen
@@ -28,23 +27,23 @@ Entry:
  	move.l	a3,LVL3_INT_VECTOR			
 	
 	;; initialise P61
-	lea 	Module1,a0
-	move.l	(a0),a0
+	lea	Module,a0
 	sub.l 	a1,a1
 	sub.l 	a2,a2
 	moveq 	#0,d0
 	jsr 	P61_Init
 
 	move.w	#(INTF_SETCLR|INTF_VERTB|INTF_INTEN),INTENA(a6)	
-
-	move.l	bitplanesp2,a0	; setup an empty bitplane
-	move.l	#IMAGESIZE,d0
-	jsr	ClearMemory	; clear it
-	jsr	WaitBlitter	; make sure it's clear
-
-	move.l	a0,a1
-	bsr	SetupImage	; select it
+	lea	bitplanes2,a0
+	move.l	#IMAGESIZE/4,d0
+.clear:
+	move.l	#0,(a0)+
+	dbra	d0,.clear
 	
+	lea	bitplanes2,a1
+	bsr	SetupImage	; select it
+
+	jsr 	WaitVerticalBlank	
 	jsr	Init		; enable the playfield
 	
 	move.l	#50*10,d0
@@ -82,9 +81,6 @@ Level3InterruptHandler:
 
 .verticalBlank:
 	move.w	#INTF_VERTB,INTREQ(a6)	; clear interrupt bit	
-	movem.l	d0-a6,-(sp)
-	;; jsr 	P61_Music		; and call the playroutine manually.
-	movem.l	(sp)+,d0-a6	
 
 	if INTERLACE==1
 	btst	#VPOSRLOFBIT,VPOSR(a6)
@@ -166,19 +162,19 @@ copperList:
 	dc.w	BPL6PTL,0
 	dc.w	BPL6PTH,0
 	dc.l	$fffffffe		
-
-	;; Module1:
-	;; incbin "../assets/P61.sowhat-intro"			;usecode $9410
 	
 	align	4
-	
-bitplanesp1:
-	dc.l	endCode
-bitplanesp2:
-	dc.l	endCode+(512)+IMAGESIZE
-bitplanesp3:
-	dc.l	endCode+(512*2)+(2*IMAGESIZE)
-userstack:
-	dc.l	endCode+(512*3)+(3*IMAGESIZE)+$1000
-Module1:
-	dc.l	endCode+(512*3)+(3*IMAGESIZE)+$1000+4
\ No newline at end of file
+
+	section .bss
+
+bitplanes1:	
+	ds.b	IMAGESIZE+512
+bitplanes2:
+	ds.b	IMAGESIZE+(512*2)
+bitplanes3:
+	ds.b	IMAGESIZE+(512*3)
+startUserstack:
+	ds.b	$1000
+userstack:	
+endUserstack:
+Module:	
\ No newline at end of file
diff --git a/assets/P61.breath_of_life.mod b/assets/P61.breath_of_life.mod
new file mode 100644
index 0000000..facf590
Binary files /dev/null and b/assets/P61.breath_of_life.mod differ